Unstable approach — N774LK
KTCS · 312026-09-04 19:15 UTC· ELITE MEDICAL AIR TRANSPORT LLC DBA, EMERGENT AIR· BE20
N774LK (Elite Medical AIR Transport LLC DBA) was inbound to KTCS on 2026-09-04. SkyMeter detected a low approach-stability score at Truth Or Consequences Municipal Airport (KTCS) on runway 31 at 19:15 UTC. Trace data at the event: 6025 ft AGL, 161 kt GS. METAR at the time reported 8 kt wind, 3 kt crosswind component, 16,093 m visibility. The approach-stability score rates the final approach against stabilized-approach gates (glideslope, lateral deviation, descent rate, and IAS) at defined altitudes. A low score means one or more of those were outside the normal envelope for how the approach was flown. The score is graded by guidance type, so instrument approaches (ILS or an aligned straight-in) are held to the full gate set, while visual and pattern arrivals are surfaced only when the score is clearly low. The score is advisory and observational, a deviation measure, not an assertion of an accident. Detection algorithm and known limitations: see SkyMeter methodology.
Pilot review data
- Runway 31
- 6025 ft AGL at event
- 161 kt ground speed
- 0 fpm vertical
- 8 kt wind
- 3 kt crosswind component
- 16,093 m visibility
- KTCS 170753Z AUTO 01008KT 10SM -RA SCT060 OVC080 17/17 A3030 RMK AO2 LTG DSNT E AND SE SLP191 P0025 T01720167
Flight context
- N774LK
- Elite Medical AIR Transport LLC DBA
- BE20
- 2026-09-04 19:15 UTC
- KTCS runway 31
Automated analysis. Events shown on this page (such as go-around, unstable approach, or runway events) are heuristic classifications produced by algorithms from publicly broadcast ADS-B data. They are intended to surface flights of interest for further review — they are not findings of fact, and they do not determine pilot fault, regulatory compliance, or the cause of any occurrence. Coverage gaps and sensor noise can affect accuracy. Only the relevant civil aviation authority or accident investigation body can make official determinations. How we detect events · Dispute or correct this data